The smart solution for
leak management
Quick to use.
Powerful results.
Designed for sustainability.
Are you tired of run-of-the-mill binders, too?
Health & Safety Risks
- Risk of back injuries from carrying heavy bags
- Risk of pneumoconiosis due to high dust levels
- Risk of slipping due to known binding agents, even when wearing safety shoes
- Granules leave behind dangerous lubricating films when used
- Granules pose a high FOD safety risk on airfields
Technical & Weather-Related Limitations
- Conventional binders form a heavy, sticky mass when exposed to leaks
- High transportation costs due to the material’s heavy weight
- Commonly used binders become lodged in the pores of traffic surfaces
- Mineral dust with sharp edges damages equipment components
- Use in rain or damp conditions is practically impossible
- Standard binders sink to the ground immediately upon contact with water
Application Issues & Labor Intensity
- Conventional binding agents are often used simply because people are not familiar with any alternatives
- Out of habit, the same products are purchased time and again
- Working in familiar binding agents with a broom is backbreaking work
- Hardly practical for use in higher parts of the system
- A wide variety of different binders are required to remove various substances
Waste Disposal & Environmental Issues
- Conventional binders are neither biodegradable nor sustainable
- Conventional binders cannot simply be incinerated
- High disposal costs due to their high weight
Absorption Capacity & Efficiency
- Conventional absorbents do not absorb leaks; they are merely wetted
- Standard absorbents do not permanently contain leaks; the liquid runs off
- High material consumption with low absorption capacity
- Repeated rework and cleaning are necessary
- More unused absorbent is disposed of than the actual amount of leaked fluid
at a glance
Loose Fiber®
Loose Fiber® RED
Safe
- Free of mineral oil-based additives and microplastics
- Free of diatomaceous earth dust, which is harmful to the lungs
- Free of PFAS and other fluorinated chemicals
Effective
- For all hydrocarbon-based fluids and chemicals
- Acts immediately and completely absorbs spilled substances in a matter of seconds
- Permanently binds absorbed substances and does not release them, even under high pressure
- TOC content after use: 1% – water purity: 99%
Approved
- Approved by DEKRA, MPA, and the Hygiene Institute
- Approvals: DWA-A 716-10 “W”, DWA-A 716-9 “R”, LTwS No. 27
- Applications: Type 1, Type II, Type III-R, Type IV “SF”“
Tested as non-flammable and non-explosive
Tested non-carcinogenic and free of fine dust emissions
Measured TOC value after use of ~3 mg/L – comparable to flowing water
patent an eco-friendly, resource-efficient, upcycling-based manufacturing process
In cooperation with the Association for the Promotion and Sustainable Improvement of Health and Working Conditions for Firefighters
Superior absorption capacity
Lightweight and easy to use
Environmentally friendly and biodegradable
High oil selectivity
Non-toxic and safe for the environment
Cost-effective in the long run
Videos
By loading this video, you agree to the privacy policy of Youtube.
Flame test with oxyacetylene [CARBBIND with acetone, waste oil, cutting fluid, lubricating grease, bearing grease]
By loading this video, you agree to the privacy policy of Youtube.
CARBBIND® Fire Extinguisher [CARBBIND® Loose Fiber® extinguishes burning brake cleaner and is neither flammable nor explosive]
CARBBIND versus…
Our Products
Our collagen fibre-based oil binders offer a wide range of applications across a variety of industries:
-
Oil and gas industry– Pipeline leaks, refinery accidents, tank farms
-
Shipping and transport– Oil spills on land and at sea, port facilities
-
Manufacturing & automotive industry– Industrial leaks, machinery maintenance
-
Energy sector– Onshore & offshore power stations
-
Environmental protection– Emergency response, clean-up of hazardous substances
Our innovative technology absorbs spilled substances in seconds and traps them permanently – safe, effective and environmentally friendly.
CARBBIND
Bucket with carrying handle
Bucket with carrying handle
KG 1,5
L 7,5 – 12,0
10-litre plastic bucket with a viewing window.
Filled with Loose-Fiber®.
1 pallet (100 buckets) can absorb up to 2,000 litres of spillage.
CARBBIND
Bag with carrying handle
Bag with carrying handle
KG 3,0
L 15,0 – 24,0
25-litre bag with a viewing window. White.
Filled with Loose Fiber®.
1 pallet (80 bags) can absorb up to 2,000 litres of spillage.
CARBBIND RED
Bag with carrying handle
Bag with carrying handle
KG 6,0
L 24,0 – 38,0
25-litre bag with a viewing window. White/red.
Filled with Loose Fiber® RED.
1 pallet (80 bags) can absorb up to 3,000 litres of spillage
CARBBIND RED
Bulk container
Bulk container
KG 1,0
L 4,0 – 7,0
Resealable cardboard box.
Filled with Loose Fiber® RED.
1 pallet (384 boxes) can absorb up to 2,600 litres of spillage.
CARBBIND RED
Wide-neck canister
Wide-neck canister
KG 6,0
L 24,0 – 38,0
For fire engines (LF).
Filled with Loose Fiber® RED.
1 pallet (36 canisters) absorbs up to 1,300 litres of spillage.
CARBBIND 3-K PAD
(1/4 EPAL pallet )
(1/4 EPAL pallet )
KG 2,5
L 12,5 – 20,0
3-chamber pad, 60 x 40 x 6 cm.
One eyelet. Filled with Loose Fiber®.
CARBBIND 6-K PAD
(EPAL 6 half-pallet)
(EPAL 6 half-pallet)
KG 4,5
L 22,5 – 36,0
6-chamber pad, 60 x 80 x 6 cm.
Four eyelets. Filled with Loose Fiber®.
CARBBIND 9-K PAD
(EPAL 1 pallet)
(EPAL 1 pallet)
KG 10,0
L 50,0 – 80,0
9-chamber pad, 120 x 80 x 6 cm.
Four eyelets. Filled with Loose Fiber®.
CARBBIND 4×4
Service-Pad small
Service-Pad small
KG 1,0
L 5,0 – 8,0
8-chamber pad, 40 x 40 x 3 cm.
One eyelet. Filled with Loose Fiber®.
CARBBIND 8×8
Service-Pad big
Service-Pad big
KG 5,0
L 25,0 – 40,0
16-chamber pad, 80 x 60 x 4 cm.
Four eyelets. Filled with Loose Fiber®.
CARBBIND Boom
Barrier/Segment
Barrier/Segment
KG 5,0
L 25,0 – 40,0
Single-chamber tube, 150 x 20 x 12 cm.
Four eyelets. Filled with Loose Fiber®.
CARBBIND Mobile Waste Collection Station
Bin, broom, dustpan
Bin, broom, dustpan
KG 15,0
Container (100% recycled HDPE)
Clamp closure + soft-close
Usage
Cut the CARBBIND Loose Fiber ® 3kg Basic or 6kg RED bag with a carrying handle diagonally along the marked line.
Sprinkle CARBBIND Loose Fiber® close to the ground onto the substance to be absorbed until it is completely covered.
Gently work in CARBBIND Loose Fiber® using a coarse broom. The substance is absorbed immediately and odours are effectively neutralised.
Contaminated CARBBIND Loose Fiber® can be swept up immediately or vacuumed up using an industrial vacuum cleaner.
Technical Information & Documentation
You can use the form below to request specific test reports, safety data sheets, and our product portfolio—including documentation regarding flammability, hygiene, and environmental compatibility.
Once you submit the form, you will receive the requested PDF documents via email.
Contact
CARBBIND solutions GmbH
Hugo-John-Straße 8
99086 Erfurt
